German Amateur Radio Station
Hardware preparation
No preparations are necessary for the iGate (LoRa32 module).
For trackers with the T-Beam module, the display may need to be connected.
Important!
If the tracker is to be
installed in a standard case, please do not use the enclosed pin
headers, otherwise the module will not fit into the case.
There are 4 lines to connect:
Vcc = 3.3 V
GND = ground
SCL = clock
SDA = Data
The connections on the left side are for a sensor that records
temperature, humidity and air pressure. This option is currently not
supported with this firmware.
<<<
Back